Maintenance for Butcher Blocks Countertops and Kitchen Islands.

admin — Sat, 09 Jan 2010 08:11:11 +0000

The solid wood represents a reliable, sturdy material that can last very long without requiring excessive protection. We would like to draw your attention to the basic maintenance instructions for the solid wood countertops, island tops or butcher blocks.

With a soft brush, oil the wood generously on all sides or simply pour a small quantity of oil on the wood and then spread it with the brush. When the top is first installed, it is advisable to apply 2-3 successive coats of oil, after which, the oil can be applied once several months or whenever needed.

Avoid setting your wood top next to extreme heat sources like stoves unless there is appropriate insulation between the heat source and the top. Avoid spilling vinegar on a wood top having a mineral oil finishing, as it can cause cupping or cracking.

Sometimes however, due to poor maintenance and improper environmental conditions, some problems might arise; it is our duty, therefore to inform about these problems and the way to solve them.

· Cupping and warping

If possible, place the top on a flat, hard surface, concave side facing down. On the convex side, uniformly place some fairly heavy objects. If it is not possible to manipulate the top, simply apply generously mineral oil on the concave side until the panels straightens.

· End splits

Will manifest whenever the panel is placed in an excessive dry environment without being properly sealed. To repair, mix wood sand with a small amount of water-based wood glue and fill the cracks thoroughly. Allow 15-20 minutes to cure, sand the area with a 120 grit sand paper and then oil the top freely.

· Scratches, cut marks and food stains

Can be removed by sanding uniformly the affected area, brushing away the resulting wood dust and applying a new coat of mineral oil.

DanettaDanetta.com » butcher blocks

Maintenance for Butcher Blocks Countertops and Kitchen Islands.